EU Registration Starts with a Responsible Person
The sequence, and the lessons from the paperwork, as we prepare one cosmetic product for registration in Europe. This is a record in progress, not a completed case.
Selling in Europe starts not with the product but with appointing a Responsible Person, who must be located within the EU.
Next come the safety assessment and the Product Information File (PIF), then notification through CPNP before the product is placed on the market.
We are still preparing this registration. So far, the most laborious part has been keeping the documents consistent with one another.
CLEARMED plans and operates its own medical aesthetic brands, and our first brand, CELLOGRAM, is a cosmetic product. We are preparing the EU registration (CPNP notification) of this one cosmetic product. This article is therefore not a completed case but the sequence and the pitfalls we have written down along the way. We checked the provisions in the consolidated text of the EU Cosmetics Regulation (Regulation (EC) No 1223/2009).1
Terms in this article
- Responsible Person
- The legal or natural person, located in the EU, who is responsible for the cosmetic product's compliance with the regulation.
- CPNP
- The online portal for notifying the European Commission of product information before a cosmetic product is placed on the market. Short for Cosmetic Products Notification Portal.
- notification
- Not an approval procedure but a procedure for informing the authorities of specified information.
- Product Information File (PIF)
- The set of documents, held by the Responsible Person, that gathers the product description, safety assessment report, manufacturing method and more.
- safety assessment
- An assessment by a qualified assessor of whether the cosmetic product is safe for people, recorded in a report.
- lot
- A batch of product made in one run under the same conditions. It is traced by number.
There are four steps to Europe
- 01Appoint a Responsible PersonA legal or natural person within the EU. Everything starts here
- 02Safety assessment · Product Information FilePrepare before placing on the market and keep for 10 years after the last lot is placed on the market
- 03CPNP notificationOnce, before placing on the market. No additional country-by-country notification is needed
- 04LabelingThe wording on the container and packaging must match the documents
Source: Regulation (EC) No 1223/2009, Articles 4, 10, 11, 13 and 19 1; European Commission CPNP guidance 2
01Decide on the Responsible Person first
In the EU, only a cosmetic product with a Responsible Person designated within the EU may be placed on the market (Article 4(1)). For imported products, the importer is the Responsible Person, and the importer may designate, by written mandate, another person established within the EU as Responsible Person (Article 4(5)). Because an importer is defined as a person established within the EU (Article 2(1)(i)), a brand company with no entity in the EU starts with an EU-based importer or with a Responsible Person that importer mandates. A distributor also becomes a Responsible Person when it places a product on the market under its own name or trademark (Article 4(6)).1
02The safety assessment and the Product Information File
A safety assessment and a safety report are required before the product is placed on the market, and the assessment is done by a person with a university degree in pharmacy, toxicology, medicine or a similar discipline (Article 10(1) and (2)). The Product Information File (PIF) is kept by the Responsible Person for 10 years from the date the last lot is placed on the market (Article 11(1)). It contains the following (Article 11(2)).
- A product description and the safety assessment report
- A description of the manufacturing method and a statement of compliance with the good manufacturing practice in Article 8
- Proof of the effect claimed for the product, where justified by the nature of the product
- Data on animal testing (including testing done to meet the requirements of third countries)
The PIF must be easily accessible to the authorities at the Responsible Person's address shown on the label (Article 11(3)).1
03Notify through CPNP before placing on the market
Before placing the product on the market, the Responsible Person electronically submits to the Commission the product category and name, the Responsible Person's name and address, the country of origin for imports, the Member State where it will be placed on the market, a contact for emergencies, and information on nanomaterials and CMR substances (Article 13(1)). When the product is placed on the market, the original labeling and, where reasonably legible, a photograph of the packaging are also notified (Article 13(2)).1
The notification channel is CPNP, the Commission's free online system (Cosmetic Products Notification Portal). Once notified, no additional country-by-country notification is needed within the EU.2 A product containing nanomaterials must be notified separately six months before it is placed on the market (with some exceptions, Article 16(3)), so it is better to settle at the formulation stage whether this applies.1
04The labeling must match the documents
The container and packaging carry the Responsible Person's name and address (with the country of origin for imports), the nominal content, the date of minimum durability, precautions for use, the batch number or identification reference, the function of the product, and the list of ingredients (Article 19(1), with exceptions for individual items). The date of minimum durability is written in "month-year" or "day-month-year" order.1
On our first print, the date of minimum durability was in year-month-day order and had to be corrected. We were also asked to explain the meaning of a symbol from a field unrelated to cosmetics and to remove it (Annex VII sets three packaging symbols). The corrected labeling had to be submitted as a set: the artwork and a photo of the actual product. We think it is better to finalize the label wording before the documents, but that is our own judgment, not an order set by law.
The most laborious part was keeping the documents consistent with one another.
05What the documents taught us
These are principles we drew from experience, not legal provisions.
- Write product names and ingredient names identically in every document, down to the letter. Before starting, create a reference table of registered names and share it first, and check similar ingredient names, such as acid and salt forms, against the ingredient list.
- Judge a received document by opening it, not by its file name, and review a corrected version from the beginning. New typos have crept in during corrections.
- Read the direction of each question in a yes/no declaration before answering. Answering "No" to "Is X absent?" declares that X is present.
This article is general information and does not replace a judgment on any individual product.
Sources
- European Union, Regulation (EC) No 1223/2009 of the European Parliament and of the Council of 30 November 2009 on cosmetic products (recast), consolidated text as of 18.05.2026 (CELEX 02009R1223-20260518, OJ L 342, 22.12.2009, p. 59), Article 2(1)(i), Articles 4, 8, 10, 11, 13, 16 and 19, Annex VII, accessed 2026-11-14, EUR-Lex consolidated text (opens in a new window). The consolidated text is for reference only; legal effect rests with the version published in the Official Journal. The original's "Community" is rendered as EU in the text.
- European Commission, Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs, Cosmetic product notification portal, accessed 2026-11-14, Commission CPNP guidance page (opens in a new window)
CLEARMED Insights · CLEARMED Co., Ltd.